How to Sew a Basic Curtain Panel

Sew Tie-Backs

Sew Curtain Tie Backs

Debbie Colgrove, Licensed to About.com

• Decide the width of your finished tiebacks. Double the width and add 1" for a seam allowance.
• Decide the length of the desired tieback. Cut the the length and width of the tieback.
• Fold the tieback in half lengthwise, with the right sides of the fabric together, matching the raw edges.
• Sew a seam in the raw edge using a 1/2" seam allowance.
• Turn the tube right side out and press with the seam along the center or bottom edge.
• Turn in the ends enough to enclose the raw edges. Stitch the ends to hold the raw edges in.
• Sew a plastic ring or thread chain to the end of the tieback to use to hold the tieback to the wall.

• Materials
• Turn and Press Raw Edges
• Side Hems
• Sew the Header & Rod Pocket
• Sew the Hem
• Sew a Valance
• Sew Tie-Backs