- Press the mitt as flat as possible
- Lay it on a piece of plain paper or pattern tracing material.
- Trace the edges of the mitt.
- Add a 1/2" to all edges.
- Mark the bottom of the thumb indent. [lil]Cut the pattern out using the outside line create by adding a 1/2".
- Keeping your fingers together and your thumb extended, trace around your hand.
- Smooth the lines to create a "mitt" appearance, approximately an inch from the edges of the traced hand.
- Add a 1/2" to the edges.
- Mark the bottom of the thumb indent.
- Cut out the pattern using the outside line from adding a 1/2".
