Sew a Cell Phone Case

Attach the Hook & Loop Tape and the Piping

Hook & Loop Tape and the Piping

Debbie Colgrove, Licensed to About.com

• Attach hook & loop tape. Place the hook section across the flap edge on the opposite side from the webbing. Trim to fit the rounded area and sew on the outer edges.

• Place the loop section in the center of the body at the straight edge, on the same side as the webbing.

• On the same side that you attached the ribbon, apply piping to the long straight edges on the body fabric. Use a 1/4" seam. (You may have to trim the seam allowance on the piping to achieve a 1/4" seam) More on Applying Piping

• Gather Your Materials
• Extend the Pattern Printout
• Fuse & Cut the Fabric
• The Back Strap
• Attach the Hook & Loop Tape and the Piping
• Attaching the Case Sides
• Attach the Bias Tape